Chemical Coating

Guangzhou Zhenroumei Chemical Coating Limited

Language: Chinese|English
86-020-87833698
Home  »  Products  »  BOYET Series

BOYET Series

BM1K Pearl Colors(Basecoat Colors)

Release time:2016/7/8 15:13:45 Click volume:

Product Name/Model:BM1K  Car Pearl Base Coat Colors


Characteristic:BM1K Pearl Colors with excellent leveling property,easy construction,excellent adhesion power and coveraging power,can match all kinds of solid colors, metallic and pearl effect. Mainly applies to intermediate cars, MPV and bus.


Substrates
Well-Sanded, Completely dried and good existing finishes as bellow:
A original paint B. Old paint firm C. 1K or2k primer
Surface Cleaning
Wash by warm soap, remove wax, silicon and other contaminations with degreaser, sandingwith P800-P1000, wash with clean water then keep dry;again with degreaser.
Mixing Ratio
BM1K Pearl Colors, Car Basecoat Colors
Thinner
1 1
<15℃
BM1K Pearl Colors
BYTX-1Fast Thinner
15-30℃
BM1K Pearl Colors
BYTX-2 StandardThinner
>30℃
BM1K Pearl Colors
BYTX-3 Slow Thinner
Spray Viscosity
14-16s to drop off, in 4# viscositycup at 25°C,
ReTreatment
After spray, allow 10-20 minutesair-drying time,then spray clear coat at once.
Spray Gun Set Up
Gravity Feed: 1.2-1.5mm 3-5kg/cm 2
Suction Feed: 1.4-1.6mm 3-5kg/cm 2
Spray Technology
Coats&Thickness: 2-3 coats, total 15-20um.
Flash-Off Time: At 25°C, 5-10 minutes between two coats, it depends on temperature and paint film.
Shelf Life
2 years in original sealed can, cool and dry place at 25℃.
Package
1L×12 or 3.75L×4
Note:
1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.
2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner to avoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.
3. To avolid problems of mottling or poor adhesion, the metallic paint film should be 15-25um.



CONTACT US

Fax:86-020-87833398
Tel:86-020-87833698
Email:export003@topwingspaint.com

  • 看不清楚? 换一张!