Chemical Coating

Guangzhou Zhenroumei Chemical Coating Limited

Language: Chinese|English
86-020-87833698
Home  »  Products  »  MARSIDE Series

MARSIDE Series

MSK-6000 Extra Fast Clear Coat

Release time:2016/7/11 17:09:26 Click volume:
Product Name/Model:MSK-6000 Extra Fast Clear Coat.
Characteristic: Extra fast drying clear coate, high gloss and hardness, easy application, low consumption and high efficiency to ensure good profit, suitable for fast spots repair.
Substrates
1K Basecoat.
Mixing Ratio
Clear Coat
Hardener
Thinner
2
1
0.1~0.3
<25℃
6000 Extra Fast Drying Clear Coat
802 Extra Fast Dry Hardener
90 Fast Thinner
Spray Viscosity
14-16s todrop off, in 4# viscosity cup at 25°C,
Pot-Life
At25°C,1.5 hour.
ReTreatment
There are particles or runs after spray, sand affected area with P2000 sand paper
after thorough drying, then polish to solve the problem.
Spray Gun Set Up
Gravity Feed: 1.2-1.5mm 4-5kg/cm²
Suction Feed: 1.4-1.6mm 4-5kg/cm²
Spray Technology
Coats&Thickness: 2-3 coats, total 25-35um
Flash-OffTime: At 25°C, 5-10 minutes between two coats,
Air-Drying Time: Allow 10-15 minutes air drying time before force drying
Drying Time
Temperature
Dust Free
Tack Free
Tack Free
Dry to Test
25°C
15 minutes
2 hours
4 hours
5 days
70°C
3 minutes
10 minutes
15 minutes
45 minutes
Shelf Life
2 years in original sealed can, cool and dry place at 20℃.
Package
5L×4 or 2.5L×8 or 5L+2.5L+1L
Note:
1. This products are extra fast reaction, after mixing clear coat with hardener, just add small quantity of thinner for spraying, the mixture should be used up within 1 hour.
2. The spray viscosity could not be too high, in case of paints defects, such as orange skin.
3. This product is suitable for spots repairs, not suitable for overall repair.
4. At temperature lower than 8°C, a forced dry by baking is recommended.
5. It is recommended to apply at conditions of temperature lower than 25°C and humidity lower than 80%, otherwise there will be defects such as blistering or blushing.
6. The products mixed with hardener should be used up soon and can not be restore for future use; clean equipments immediately with thinner after application, otherwise it is very difficult to be cleaned after dry.

CONTACT US

Fax:86-020-87833398
Tel:86-020-87833698
Email:export003@topwingspaint.com

  • 看不清楚? 换一张!