|
Substrates |
Plastic parts,such as PP, PA, PE. |
|
SurfaceCleaning |
Remove wax, silicon and other contaminations with degreaser, sanding with P600-P800, wash with clean water then keep dry; again with degreaser. |
|
Coating |
2 coats, total 4-5um |
|
Re-coat |
At 25°C, 5-10 minutes between two coats. |
|
Spray GunSet Up |
Gravity Feed: 1.2-1.5mm 4-5kg/cm² Suction Feed: 1.4-1.6mm 4-5kg/cm² |
|
SprayTechnology |
Coats&Thickness: 2-3 coats, total 4-5um. Flash-Off Time: At 25°C, 5-10 minutes between two coats, it depends on temperature and paint film. |
|
Shelf Life |
2 years in original sealed can, cool and dry place at 20℃. |
|
Package |
1L×12 |
Note:
1. The products are ready for use.
2. It is recommended not to spray thickly to avoild peeling off.
3. Test is recommended before application due to the variety of plastic parts.
