Chemical Coating

Guangzhou Zhenroumei Chemical Coating Limited

Language: Chinese|English
86-020-87833698
Home  »  Products  »  GOODSIF Series

GOODSIF Series

MF2K Solid Colors

Release time:2016/7/11 17:24:26 Click volume:
Product Name/Model:MF2K Solid Colors
Characteristic:MF2K Solid Colors, high gloss and build, good performance of leveling property,easy construction, excellent pretective and coveraging power, long lasting bright color.Mainly applies to intermediate cars, MPV and bus.
Substrates
Well-Sanded, Completely dried and good existing finishes as bellow:
A original paint     B. Old paint firm     C. 1K or 2k primer
Surface Cleaning
Wash by warm soap, remove wax, silicon and other contaminations with degreaser, sanding with P800-P1000, wash with clean water then keep dry; again with degreaser.
Mixing Ratio
MF2K Solid Colors
Hardener
Thinner
2 1 0.2-0.4
<15℃
MF2K Solid Colors
MF281 Fast Hardener
60 Fast Thinner
15-30℃
MF2K Solid Colors
MF282 Standard Hardener
61 Standard Thinner
>30℃
MF2K Solid Colors
MF283 Slow Hardener
62 Slow Thinner
Spray Viscosity
16-19s to drop off, in 4# viscosity cup, at 25°C,
Pot-life
At 25°C
2 hours with fast hardener.
4 hours with standard or slow hardener.
Re-Treatment
There are particles or runs after spray, sand affected area with P2000 sand paper after thorough drying, then polish to solve the problem.
Spray GunSet Up
Gravity Feed: 1.2-1.5mm 3-5kg/cm ²
Suction Feed: 1.4-1.6mm 3-5kg/cm²
SprayTechnology
Coats&Thickness: 2-3 coats, total 35-50um Flash-Off Time: At 25°C, 5-10 minutes between two coats, Air-Drying Time: Allow 10-15 minutes air drying time before force drying

Temperature
Dust Free
Tack Free
Dry To Handle
Dry To Test
+25°C
40 minutes
2 hours
9 hours
6 Days
+70°C
5 minutes
10 minutes
25 minutes
50 Minutes
Shelf Life
2 years in original sealed can, cool and dry place at 25℃.
Package
1L×12 or 3.75L×4
Note:
1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.
2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner to avoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.
3. The products mixed with hardener should be used up soon and can not be restore for future use;clean equipments immediately with thinner after application, otherwise it is very difficult to be cleaned after dry.

CONTACT US

Fax:86-020-87833398
Tel:86-020-87833698
Email:export003@topwingspaint.com

  • 看不清楚? 换一张!