|
Substrates |
Plastic parts, such as PP, PA, PE. |
|
SurfaceCleaning |
Remove wax, silicon and other contaminations with degreaser, sanding with P600-P800, wash with clean water then keep dry; again with degreaser. |
|
Coating |
2 coats, total 4-5um |
|
Re-coat |
At 25°C, 5-10 minutes between two coats. |
|
Spray GunSet Up |
Gravity Feed: 1.2-1.5mm 4-5kg/cm ² Suction Feed: 1.4-1.6mm 4-5kg/cm ² |
|
Spray Technology |
Coats&Thickness: 2-3 coats, total 4-5um.Flash-Off Time: At 25°C, 5-10 minutes between two coats, it depends on temperature andpaint film. |
|
Shelf Life |
2 years in originalsealed can, cool and dry place at 20℃. |
|
Package |
1L×12 |
