Chemical Coating

Guangzhou Zhenroumei Chemical Coating Limited

Language: Chinese|English
Home  »  News  »  Industry News

Industry News

How To Deal With Car Refinish Paints Interface?

Dealing with the car refinish paints interface, we could do as following: 1. Use a polishing machine to throw the entire finished panel (do not sand with two thousand sandpapers) and throw away the rust and stain on the paint film. 2. Degreasing with degreasing agent and removing wax. 3. Polishing with 2000 sandpaper, the area is greater than the range of 10cm 4. After grinding, spraying the background paint,

View >>

How To Do After Hurting The Car Paint?

Repair proposal: scratches are very deep, or sheet metal spray paint it, the sooner the better. If the scratches are not large or deep, it will only affect the appearance, you can repair it in the end. Car paint local scratch repair: you need to scrape gold ash, then spray in the primer, topcoat. If the topcoat is a metallic paint, it needs a layer of varnish. If it is a 2K primer surfacer, it will not be used. The pri

View >>

How To Check The Car Paint Scratches If Hurt The Paint Or Not?

The automotive paints was marked with a big mark. The most important thing was that check it if hurt the paint. In this case, how can we obverse automotive plastic primer? To know that the automotive plastic primer is generally gray, carefully observe the deepest point of the scratch. If the primer is injured, it means that the air can easily erode the sheet metal and cause oxidative rust. If the primer is okay, it is

View >>

What If The Car Paint Destroys?

If it is a small scratch, on the surface of the car paint, it is generally possible to polish and wax at a car beauty shop. If the 1K primer surfacer has been exposed, the car body is exposed with a primer. It is best to repair it. Because the body is metal, once the primer is exposed, the protection against the sheet metal is lower than before, and the front and rear bumpers are usually plastic. Whether it is the body or the

View >>

Car Repair Paint Applied Method

Car repair paint, scratch repair, divided into two kinds: First, it is their own spray paint repair: This kind of car paint China repair is for the kind of local scratches, the area is not, did not hurt the paint in the case, you can use their own repair, conveniently and fast. The repair process is as follows: 1, to determine the size of scratches, select the appropriate repair program; 2, cleaning scratches, dry; 3, sanding

View >>

Classification Of Automotive Paints

1. Silver powder paint: aluminum powder is added to the automotive paints, belonging to metallic paint. 2. Pearl automotive paint: Add pearl powder in it. It Belongs to metallic paint. 3. Non-metallic paint: It is a car paint without metal powder, belonging to ordinary paint. 4. Plain paint: no other color tone, the most typical is: white, black, big red, yellow, are ordinary paint. 5. Solid color paint: bright finish, you can

View >>

Do You Know The Type Of Car Paint?

1. Metallic paint: As far as metal is concerned, as long as there is metal powder (aluminum powder, pearl powder, etc.) in the car paint, it can be called metal paint—car metal paint, with harder hardness and sparkling particles. 2. Ordinary automotive paints: paint with the opposite of metal paint, no metal powder paint. Common, such as white, black; White if you add pearl powder to white pearls, belong to the metal paint, bu

View >>

Are You Clear What Is The Car Paint?

There are two kinds of automobile spray paint: one is automobile paint on the frame and car shell when it is producing automobile, which belongs to automobile original paint; the other is automobile paint repair on the original paint, when the car is original plant paint aging, cracking defects and changes to the body color, etc., to re-paint the body paint repair, also known as car refinish paint. First, the original car pain

View >>

How Does The Car Paint Spray?

Car paint is composed of multiple layers of paint. How do we spray when repairing and refurbishing paints? 1. First of all to repair the car sheet metal: for the accident car, sheet metal deformation, depression, etc., they need to be repaired. 2. Polished to remove the old paint layer: You can use machine sandpaper p180 polished clear. 3. Clean the cloth with a degreasing agent and wipe the surface to remove the oil. Then

View >>

Car Paint Blisters

The paint on the new car certainly does not have the phenomenon of bubbles, and the bubbles in the car paint are all phenomena that after the car is repainted and refurbished. There are many reasons for foaming. The most likely cause is the effect of moisture. The first is that after the car is painted, the moisture is in the paint film. When it is hot, it needs to evaporate. It will form a pressure bulge on the surface of th

View >>

Car Paint Protection Precautions:

1. Regularly clean the dust on the surface of the car. Because the body is electrostatic, it will attract dust. 2. Do not use washing powder, soapy water, detergent and other alkaline liquids to wash car , long time use of them will make the car paint faster aging, no gloss. With water on it. 3. It is recommended to wax once a month to improve the brightness of the paint and the protective effect on the paint. 4. If the car is

View >>

How To Protect Car Paint?

As an automotive paint manufacturer, here are some examples of how we should protect our car paints in China daily for you. 1, Try not to let the car exposure. Although automotive paints have good weatherability and UV resistance, paints will age and fade over time. 2, Don't wash your car under the sun. Don't wash your car immediately after the sun exposure. This often leads to paint cracking. 3, After the rain to develop the

View >>

Do You Know The "Four Paint And Three Baking" Car Paint?

In the original car paint coating layer, in addition to the color paint layer does not need to be baked, the other three paint layers need to be baked, people call this coating process "four paint and three baking." Baking temperature needs to reach above 170°C. I heard that there are car paint manufacturers using "three painted and two baked" to remove the middle coating layer. Car paint repair coating is generally five lay

View >>

Do You Know How Many Layers Of Car Paint?

A total of 4 layers of paint are generally applied to new cars: 1, Electrophoretic paint layer: Electrophoretic paint coating is the entire body foamed into the electric pool inside, no dead ends roll tumbling foam, the main role is anti-rust, rust, the body is the bottom of anti-rust. The 2, In the coating basecoat layer: In fact, after the electrophoretic paint layer is not directly on the middle primer, car chassis will be

View >>

What Brand Of Car Clear Coat Is Good?

The final process of auto repair painting is spray clear coat. Its main function is to improve the brightness of the entire automotive paint film, outdoor weather resistance, UV resistance, and excellent adhesion to protect the aging of the paint film. As automotive clear coat is located in the outermost layer of automotive paint, it is the most vulnerable to environmental erosion and pollution, so what brand of clear coat is

View >>

Is Car Extra Fast Clear Coat Toxic?

Car extra fast clear coat is a clear coating of resin plus solvent, with resin as the main film forming material. The main harmful substances of automobile varnish are derived from solvents, which are generally benzene series, ketone series and ester series. The varnish has a large odor and does not represent a great toxicity. The solvent content is high, but the odor is small, the harm is great, the resin content is high, the

View >>
First Prev Next Last 16/Page Total:7/108 Current:3 



  • 看不清楚? 换一张!